Dongfeng 20000L CLW5250ZYSD Compession Garbage Truck
1.Product Structure
2.Product Specification
2.Product Specification
| Vehicle parameters | |||||||||||
| Vehicle Model | CLW5250ZYSD | Vehicle Brand | CHENGLI | ||||||||
| Overall dimensions | 11310X2480X3600mm | Curb weight | 16200kg | ||||||||
| Loading capacity | 20m3 | ||||||||||
| Manufacturer | Chengli Special Automobile Manufacture Co.,Ltd | ||||||||||
| Chassis parameters | |||||||||||
| Chassis model | DFL1250A9 | Chassis brand | DONGFENG | ||||||||
| Overall dimensions | 10460x2480x3030mm | Wheel base | 5350+1300mm | ||||||||
| Front/rear wheel track | 1986/1860/1860mm | Front/rear suspension | 1460/2350mm | ||||||||
| Approach/departure angle | 20/16° | Maximum speed | 90km/h | ||||||||
| Chassis Manufacturer | Dongfeng Motor Company | ||||||||||
| Cab | Configuration | D310 standard flat roof a row and a half deluxe cab(with sleeping berth),cab,air conditioner,electric glass,hydraulic mechanical flip, channel type instrument panel,central lock,allowable 3 passengers | |||||||||
| Color | white,other color is optional | ||||||||||
| Engine | Model | C260 33 | |||||||||
| Emission | Euro 3 | ||||||||||
| Type | 6 cylinders,in-line,4-stroke,water-cooled,turbo inter-cooling,diesel engine | ||||||||||
| Rated power | 260hp,rated power speed 2200rpm | ||||||||||
| Displacement | 8300ml | ||||||||||
| Max.torque | 1090N·m | ||||||||||
| Bore x stroke | 114x135mm | ||||||||||
| Manufacturer | Dongfeng Cummins Engine Co., Ltd. | ||||||||||
| Tire | Size | 11.00R20,steel wire tire | |||||||||
| Number | 10+1 nos | ||||||||||
| Brake | Double loop air brake system, exhaust brake | ||||||||||
| Clutch | Push type diaphragm spring clutch,Φ430 | ||||||||||
| Frame | (300×80×[8+4])mm | ||||||||||
| Fuel tank | 350L aluminum fuel tank | ||||||||||
| Front axle | DANA 7.0T | ||||||||||
| Rear axle | DANA 10.0T | ||||||||||
| Drive form | 6X4 | ||||||||||
| Rated voltage | 24V,DC | ||||||||||
| Transmissions | Gearbox 9JS119T-B, 9 speed forward 1 reverse. | ||||||||||
| Steering device | Power assisted steering | ||||||||||
| Steering wheel | Left hand drive | ||||||||||
| Selective configuration | |||||||||||
| If there is a slight change in the chassis parameters above,please take the actual product as the standard | |||||||||||
| Refuse compactor structure parameters | |||||||||||
| Equipment | |||||||||||
| Structure | Body, sub frame, lifting rear part, the loading device, the pushing-out plate, hydraulic and electric systems | ||||||||||
| Loading capacity | 20m3 | ||||||||||
| System of loading | Mechanized, rear loading | ||||||||||
| Modes of the pressing | Manual,semi-automatic,automatic,lifting rear part operation manual,loading,pushing,pressing, pushing out automatic | ||||||||||
| Body | |||||||||||
| Version | All-metal | ||||||||||
| Shape | arc-shaped | ||||||||||
| Sidewalls | Sheet carbon steel (thickness: 4 mm) | ||||||||||
| Bottom | Sheet carbon steel (thickness: 5 mm) | ||||||||||
| Roof | Sheet carbon steel (thickness: 4 mm) | ||||||||||
| Front frame | Sheet carbonaceous steel (thickness: 5 mm) | ||||||||||
| Rear frame | shaped profile from sheet carbon steel (thickness:5 mm) | ||||||||||
| Basis | 120x120mm (thickness: 5 mm) | ||||||||||
| Loading bunker | |||||||||||
| Loading bunker | All-metal with sidewalls and a loading ladle | ||||||||||
| Volume | 1.5 m3 | ||||||||||
| Sidewalls | Sheet carbon steel (thickness: 4 mm) | ||||||||||
| Ladle floor material | Sheet carbon steel (thickness: 5 mm) | ||||||||||
| Liquid drain | Drainage channel,sewage tank | ||||||||||
| Working zone Lighting | 2 lamps | ||||||||||
| Mechanism of raising | Two hydraulic cylinders | ||||||||||
| Ensuring tightness | Between the body and lifting back part in the lower part profile acid-proof rubber is used. | ||||||||||
| Pressing system | |||||||||||
| Features | Control mode diversification,bidirectional compression | ||||||||||
| Pressure | 16Mpa | ||||||||||
| Compaction ratio | 3.0:1 | ||||||||||
| Loading cycle | 25-30 second | ||||||||||
| Unloading cycle | 15-20 second | ||||||||||
| pressing mechanism | The giving plate and hinge related pressing plate moving on two directing bars | ||||||||||
| Pressing mode | Automatic pressing (1 full cycle and continuous pressing) and controlling of each cycle of pressing separately |
||||||||||
| Control of pressing | Control from the external panel on the bunker | ||||||||||
| Lifting rear part | |||||||||||
| Mechanism of lifting | Two hydraulic cylinders | ||||||||||
| Function description | Suitable for various rubbish bins | ||||||||||
| Others | |||||||||||
| Color and Logo | Optional | ||||||||||
| Standard configuration | Chassis,arc-shaped body,sub frame,rear lifting part,loading bunker,pushing-out plate,hydraulic system,pressing system,sewage tank,climbing ladder,pneumatic control. | ||||||||||
| Selective configuration | PLC electric automatic control,multifunctional rear lifting part,rear handrail and footplate,other shapes of body,rear swing arm,and etc. | ||||||||||
